EMANE XML Files

Table of Contents {:toc}

Overview

Introduction to the XML files generated by CORE used to drive EMANE for a given node.

EMANE Demo 0 may provide more helpful details.

Run Demo

Select Open... within the GUI
Load emane-demo-files.xml
Click
After startup completes, double click n1 to bring up the nodes terminal

Example Demo

We will take a look at the files generated in the example demo provided. In this case we are running the RF Pipe model.

Generated Files

Name	Description
<node name>-platform.xml	configuration file for the emulator instances
<interface name>-nem.xml	configuration for creating a NEM
<interface name>-mac.xml	configuration for defining a NEMs MAC layer
<interface name>-phy.xml	configuration for defining a NEMs PHY layer
<interface name>-trans-virtual.xml	configuration when a virtual transport is being used
<interface name>-trans.xml	configuration when a raw transport is being used

Listing File

Below are the files within n1 after starting the demo session.

root@n1:/tmp/pycore.46777/n1.conf# ls
eth0-mac.xml  eth0-trans-virtual.xml  n1-platform.xml       var.log
eth0-nem.xml  ipforward.sh            quaggaboot.sh         var.run
eth0-phy.xml  n1-emane.log            usr.local.etc.quagga  var.run.quagga

Platform XML

The root configuration file used to run EMANE for a node is the platform xml file. In this demo we are looking at n1-platform.xml.

lists all configuration values set for the platform
The unique nem id given for each interface that EMANE will create for this node
The path to the file(s) used for definition for a given nem

root@n1:/tmp/pycore.46777/n1.conf# cat n1-platform.xml
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE platform SYSTEM "file:///usr/share/emane/dtd/platform.dtd">
<platform>
  <param name="antennaprofilemanifesturi" value=""/>
  <param name="controlportendpoint" value="0.0.0.0:47000"/>
  <param name="eventservicedevice" value="ctrl0"/>
  <param name="eventservicegroup" value="224.1.2.8:45703"/>
  <param name="eventservicettl" value="1"/>
  <param name="otamanagerchannelenable" value="1"/>
  <param name="otamanagerdevice" value="ctrl0"/>
  <param name="otamanagergroup" value="224.1.2.8:45702"/>
  <param name="otamanagerloopback" value="0"/>
  <param name="otamanagermtu" value="0"/>
  <param name="otamanagerpartcheckthreshold" value="2"/>
  <param name="otamanagerparttimeoutthreshold" value="5"/>
  <param name="otamanagerttl" value="1"/>
  <param name="stats.event.maxeventcountrows" value="0"/>
  <param name="stats.ota.maxeventcountrows" value="0"/>
  <param name="stats.ota.maxpacketcountrows" value="0"/>
  <nem id="1" name="tap1.0.f" definition="eth0-nem.xml">
    <transport definition="eth0-trans-virtual.xml">
      <param name="device" value="eth0"/>
    </transport>
  </nem>
</platform>

NEM XML

The nem definition will contain reference to the transport, mac, and phy xml definitions being used for a given nem.

root@n1:/tmp/pycore.46777/n1.conf# cat eth0-nem.xml
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE nem SYSTEM "file:///usr/share/emane/dtd/nem.dtd">
<nem name="emane_rfpipe NEM">
  <transport definition="eth0-trans-virtual.xml"/>
  <mac definition="eth0-mac.xml"/>
  <phy definition="eth0-phy.xml"/>
</nem>

MAC XML

MAC layer configuration settings would be found in this file. CORE will write out all values, even if the value is a default value.

root@n1:/tmp/pycore.46777/n1.conf# cat eth0-mac.xml
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE mac SYSTEM "file:///usr/share/emane/dtd/mac.dtd">
<mac name="emane_rfpipe MAC" library="rfpipemaclayer">
  <param name="datarate" value="1000000"/>
  <param name="delay" value="0.000000"/>
  <param name="enablepromiscuousmode" value="0"/>
  <param name="flowcontrolenable" value="0"/>
  <param name="flowcontroltokens" value="10"/>
  <param name="jitter" value="0.000000"/>
  <param name="neighbormetricdeletetime" value="60.000000"/>
  <param name="pcrcurveuri" value="/usr/share/emane/xml/models/mac/rfpipe/rfpipepcr.xml"/>
  <param name="radiometricenable" value="0"/>
  <param name="radiometricreportinterval" value="1.000000"/>
</mac>

PHY XML

PHY layer configuration settings would be found in this file. CORE will write out all values, even if the value is a default value.

root@n1:/tmp/pycore.46777/n1.conf# cat eth0-phy.xml
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE phy SYSTEM "file:///usr/share/emane/dtd/phy.dtd">
<phy name="emane_rfpipe PHY">
  <param name="bandwidth" value="1000000"/>
  <param name="fading.model" value="none"/>
  <param name="fading.nakagami.distance0" value="100.000000"/>
  <param name="fading.nakagami.distance1" value="250.000000"/>
  <param name="fading.nakagami.m0" value="0.750000"/>
  <param name="fading.nakagami.m1" value="1.000000"/>
  <param name="fading.nakagami.m2" value="200.000000"/>
  <param name="fixedantennagain" value="0.000000"/>
  <param name="fixedantennagainenable" value="1"/>
  <param name="frequency" value="2347000000"/>
  <param name="frequencyofinterest" value="2347000000"/>
  <param name="noisebinsize" value="20"/>
  <param name="noisemaxclampenable" value="0"/>
  <param name="noisemaxmessagepropagation" value="200000"/>
  <param name="noisemaxsegmentduration" value="1000000"/>
  <param name="noisemaxsegmentoffset" value="300000"/>
  <param name="noisemode" value="none"/>
  <param name="propagationmodel" value="2ray"/>
  <param name="subid" value="1"/>
  <param name="systemnoisefigure" value="4.000000"/>
  <param name="timesyncthreshold" value="10000"/>
  <param name="txpower" value="0.000000"/>
</phy>

Transport XML

root@n1:/tmp/pycore.46777/n1.conf# cat eth0-trans-virtual.xml
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE transport SYSTEM "file:///usr/share/emane/dtd/transport.dtd">
<transport name="Virtual Transport" library="transvirtual">
  <param name="bitrate" value="0"/>
  <param name="devicepath" value="/dev/net/tun"/>
</transport>

6.3 KiB Raw Blame History